What should we pay attention to when selecting pipe chain conveyor accessories?
The conveying chain of pipe chain conveyor is an indispensable part of industrial equipment. It is related to the normal productivity and work quality of machinery and equipment. The lubrication of another transmission chain is very key, but we can't apply all the lubricating grease with lubrication effect to the transmission chain wholeheartedly. We should lubricate the transmission chain according to external standards and places, When the transmission chain and the transmission chain cooperate with each other, it is stipulated that the lubricating grease should be pure crystalline, otherwise the lubricating grease will cause particle residue or corrosion on the surface of the transmission chain, which will cause superfluous inconvenience in all normal work of the transmission chain, make it impossible to work normally, and then reduce the working efficiency of machinery and equipment, Therefore, we must pay attention to these in the ordinary maintenance of the transmission chain.
In the application and maintenance of the transmission chain, we should pay attention to the following problems: when starting the transmission chain, we should first check whether the operation of the transmission chain is normal and whether the tightness of the saw chain is normal. Forget to turn off the chain brake before operation, so as to stop the transmission chain and avoid the risk of startup. However, the chain brake should be released before work, otherwise the needle roller bearing will be damaged. When the transmission chain rotates, pay attention not to have friction with the road or other objects.
In the normal application of the transmission chain, the transmission chain of the pipe chain conveyor manufacturer is prone to corrosion and excessive damage. We can only do a good job in the maintenance of the transmission chain, which can increase the service life of the transmission chain and ensure the normal operation of the machinery and equipment. Here, let's talk to you about the key points for the usual maintenance of the transmission chain.
1. It is not necessary to place the conveying chain in a wet and cold area, which will easily cause corrosion and erosion of the transmission chain.
2. It is not necessary to drive the chain in areas with high temperature and sunlight, which will cause deformation of the drive chain.
3. Areas with organic chemical etching shall be eliminated.
First, check whether the driving chain wheel on the crane shaft is appropriate and whether there is off shaft or skew. Secondly, the transmission chain shall be installed tightly and loosely from beginning to end. Again, when the transmission chain is too long to be disassembled, the even number must be disassembled, and the opening and rotation directions must be reversed. When the transmission chain is seriously damaged, it shall be replaced immediately, otherwise it will seriously endanger the operation of the lifting equipment. The old drive chain cannot be connected with the new drive chain, otherwise it is easy to have safety accidents. Finally, always add grease to reduce damage.
On the other hand, we should pay attention to the proper application of the transmission chain during the actual operation in our daily work, otherwise the transmission chain will be lifted and damaged. It is particularly important to select a good large and medium-sized transmission chain manufacturer.