What are the reasons for the wear of pipe chain conveyor accessories and conveyor chain
China is a major producer of the chain industry and is also marching towards the world's chain production power. According to the characteristics of China's chain industry, this is also the future development direction and development path of the chain industry, and various related factors, such as chain market, chain variety and quality, will also undergo new changes.
1. Horizontal type: feed from one end and discharge from the other end.
2. Inclined horizontal type: feeding from the low end and discharging from the high end.
3. Vertical: feed from the bottom and discharge from the top.
4. Combined type: relay combination of multiple pipe chain machines to realize three-dimensional conveying. See typical cases for details. Horizontal to vertical conveying, multi-point feeding and multi-point discharging, easy to realize automatic control.
5. Folding type: it is converted into Z-shape or L-shape by a pipe chain machine to realize three-dimensional conveying. See the typical case diagram for details. It can feed and discharge at multiple points, which is easy to realize automatic control.
Chemical products: various chemical raw materials, PTA (terephthalic acid), PVC (polyvinyl chloride), chemical fertilizers, pesticides, intermediates, etc
Mineral products: titanium ore powder, iron ore powder, rare earth ore powder, pulverized coal, carbon powder, various ore powders, etc
Building materials: cement, sand, lime, concrete, etc
Food: grain, flour, starch, additives, sugar, salt, etc
In the daily use of the conveying chain, the chain of the pipe chain conveyor manufacturer is prone to rust and excessive wear. Only by doing a good job in the maintenance of the chain can we prolong the service life of the chain and ensure the normal operation of the equipment. Here, let's talk about the key points of daily chain maintenance.
1. Do not put the conveying chain in a wet place, which will easily cause rust and corrosion of the chain.
2. Do not place the chain in high temperature and direct sunlight, which will cause the deformation of the chain.
3. Keep away from places with chemical corrosives
First, check whether the position of the chain wheel on the lifting shaft is correct and whether there is off-axis or inclination. Secondly, the chain installation should always be elastic. Thirdly, when the chain is too long to be disassembled, the even number must be disassembled, and the opening and rotation direction must be opposite. The chain shall be replaced in time when it is seriously worn, otherwise it will seriously affect the work of the crane. The old chain cannot be connected with the new chain, otherwise it is easy to cause accidents. Finally, often add lubricating oil to reduce wear.